JVC RX-F10S manual Setting Auto Surround-AUTO Surrnd

Setting the digital input (DIGITAL IN) terminals—DIGITAL IN1/2/3

When you use the digital input terminals, register what components are connected to which terminals—DIGITAL IN1/2/3 (see page 11) so that the correct source name will appear when you select the digital source.

Select one of the following components for each terminal:

DVR/DVD For the DVD player (or DVD recorder).

DBS For the DBS tuner.

VCR For the VCR.

TV For the TV.

Initial setting: DVR/DVD (for “DIGITAL IN1”)

DBS (for “DIGITAL IN2”)

VCR (for “DIGITAL IN3”)

NOTES

•You cannot assign the same component for different terminals. The priority order for assignment is as follows:

“DIGITAL IN1” > “DIGITAL IN2” > “DIGITAL IN3.”

Ex.: When “DIGITAL IN1” is set to “DVR/DVD.”

DIGITAL IN1 DVR/DVD DBS VCR TV

For “DIGITAL IN2,” “DBS,” “VCR,” and “TV” are selectable.

• In this case, “VCR” is selected.

DIGITAL IN2 DVR/DVD DBS VCR TV

For “DIGITAL IN3,” “DBS” and “TV” are selectable.

DIGITAL IN3	DVR/DVD		DBS	VCR		TV
		: Selectable			: Not selectable

•Setting “DIGITAL IN1” affects “DIGITAL IN2” and “DIGITAL IN3” settings. When you have changed “DIGITAL IN1,” confirm the components assigned to “DIGITAL IN2” and “DIGITAL IN3.”

Setting Auto Surround—AUTO SURRND

You can enjoy the Surround mode simply by selecting the source (with digital input selected for that source).

•Auto Surround also works when the input mode changes from analog to digital.

•For details about the Surround/DSP modes, see pages 27 to 29. Select “AUTO SR: ON” when activating Auto Surround.

AUTO SR: ON

The AUTO SR indicator lights up on the display.

•If a multi-channel signal comes in, an appropriate Surround mode will be turned on.

•If a Dolby Digital 2-channel or DTS 2-channel signal with surround signal comes in, “PLII MOVIE” or “NEO:6CINEMA” will be selected.

•If a Dolby Digital 2-channel or DTS 2-channel signal without surround signal comes in, “SURRND OFF (stereo)” will be selected.

•If a Linear PCM signal comes in, nothing will change.

AUTO SR:OFF

Select to deactivate Auto Surround.

Initial setting: AUTO SR:OFF

NOTES

•This function does not take effect in the following cases:

–While playing an analog source,

–While selecting any of DSP modes (see page 29), or one of the fixed digital decode mode—“DGTL D.D.” or “DGTL DTS” (see page 13), and

–While listening with the headphones.

•If you press SURROUND with Auto Surround activated, Auto Surround will be canceled temporarily for the currently selected source.

Auto Surround setting will be restored in the following cases:

–When you turn the receiver off and on,

–When you change the source,

–When you change the analog/digital input, and

–When you select “AUTO SR: ON” again.

Selecting the component video input mode—DVD VIDEO/VCR VIDEO

When you use the component video inputs for connecting the DVD recorder (or DVD player) or VCR, register the type of video input jacks.

If you have not selected appropriate video input jacks, the AV COMPU LINK remote control system cannot operate properly (see page 32).

For the DVD recorder or DVD player (DVD VIDEO):

DVD : S/C Select when connecting the DVD recorder (or DVD player) to the composite video or S-video input jacks.

DVD :COMPNT Select when connecting the DVD recorder (or DVD player) to the component video input jacks.

Initial setting: DVD : S/C

For the VCR (VCR VIDEO):

VCR : S/C	Select when connecting the VCR to the
	composite video or S-video input jacks.
VCR :COMPNT	Select when connecting the VCR to the
	component video input jacks.

Initial setting: VCR : S/C

English

Basic settings

21