Husky HME-421E, HME-423E Management Main Screen, Basic Settings, System Information, System Name

Configuration Using a Web Browser

4-4 Management Main Screen

See below for the web-based management interface main screen. The function menu is located on the left hand side of this entrance page.

4-5 Basic Settings

This section covers the most commonly used configurations for maintain and control HME-421E/423E.

4-5.1 System Information

This feature allows you to assign the system name and location, and to view the system information.

System Name	Use this feature to assign a name for the switch. The maximum length is
	64 bytes.
System Description	To display the description of the switch. This is READ ONLY information.
	It cannot be modified.
System Location	Use this feature to specify the physical location of the switch. The
	maximum length is 64 bytes.
	To provide the information of the contact person in case of problems. Use
System Contact	this feature to enter the contact person info responsible for maintain this
	switch.
Firmware Version	To display the switch’s firmware version.
Kernel Version	To display the switch’s kernel software version.
MAC Address	To display the unique hardware address assigned by Ethernet Direct
	(default).

4-2