Husky HME-423E, HME-421E user manual C-15 SNTP Commands Set, C-16 X-Ring Commands Set

			Command Set Lists
C-15 SNTP Commands Set
Commands	Level	Description	Example
sntp enable	G	Enable SNTP function.	switch(config)#sntp enable
sntp daylight	G	Enable daylight saving	switch(config)#sntp daylight
		time. If SNTP function is
		inactive, this command
		can’t be applied.
sntp daylight-period	G	Set period of daylight	switch(config)# sntp daylight-period
[Start time] [End time]		saving time. If SNTP	20060101-01:01 20060202-01:01
		function is inactive, this
		command can’t be
		applied.
		Parameter format:
		[yyyymmdd-hh:mm]
sntp daylight-offset	G	Set offset of daylight	switch(config)#sntp daylight-offset 3
[Minute]		saving time. If SNTP
		function is inactive, this
		command can’t be
		applied.
sntp ip	G	Set SNTP server IP, if	switch(config)#sntp ip 192.169.1.1
[IP]		SNTP function is inactive,
		this command can’t be
		applied.
sntp timezone	G	Set timezone index, use	switch(config)#sntp timezone 22
[Timezone]		“show sntp timzezone”
		command to get more
		information of index
		number.
show sntp	P	Show SNTP information.	switch#show sntp
show sntp timezone	P	Show index number of	switch#show sntp timezone
		time zone list.
no sntp	G	Disable SNTP function.	switch(config)#no sntp
no sntp daylight	G	Disable daylight saving	switch(config)#no sntp daylight
		time.
C-16 X-Ring Commands Set
Commands	Level	Description	Example
ring enable	G	Enable X-Ring.	switch(config)#ring enable
ring master	G	Enable Ring Master.	switch(config)#ring master
ring couplering	G	Enable Couple Ring.	switch(config)#ring couplering
ring dualhoming	G	Enable Dual Homing	switch(config)#ring dualhoming
ring ringport	G	Configure 1st/2nd Ring	switch(config)#ring ringport 7 8
[1st Ring Port] [2nd Ring		Port.
Port]
ring couplingport	G	Configure Coupling Port.	switch(config)#ring couplingport 1
[Coupling Port]
ring controlport	G	Configure Control Port.	switch(config)#ring controlport 2
[Control Port]

C-13