Configuration Using a Web Browser
4-6.14.2 Trap Configuration
A trap manager is a management station that receives the trap messages generated by the switch. If no trap manager is defined, no traps will be issued. To define a management station as a trap manager, assign an IP address, enter the SNMP community strings, and select the SNMP trap version.
IP Address | This feature allows the administrator to enter the IP address of the trap | |
manager. | ||
| ||
Community | This feature allows the administrator to enter the community strings for | |
trap stations. | ||
| ||
Trap Version | This feature allows the administrator to select the SNMP version. |
After finishing necessary configurations, click on Apply to save the settings.
4-6.14.3 SNMP v3 Configuration
SNMPv3 primarily added security and remote configuration enhancements to SNMP, including:
zMessage integrity to ensure that a packet has not been tampered with in transit.
zAuthentication to verify that the message is from a valid source.
zEncryption of packets to prevent snooping by an unauthorized source.
Please follow the steps below to configure SNMP v3 settings.
