Husky HME-421E, HME-423E Event Configuration, System event selection, Port event selection

Configuration Using a Web Browser

4-6.7.3 Event Configuration

This feature allows the administrator to pre-define the events which will trigger the system log to document errors occurred and send out alert messages. The administrator can select system log events and SMTP events. In addition, per port log and SMTP events can be selected too.

	This feature allows the administrator to select events that will trigger the
	system to issue logs. Check the box to select the events.
	There are four events available to pre-define:
	Device cold start: when the device has a cold start action, the system
	will issue a log event.
System event selection	Device warm start: when the device has a warm start action, the system
	will issue a log event.
	Authentication Failure: when the SNMP authentication fails, the system
	will issue a log event.
	X-Ring topology change: when the Redundant-Ring topology changes,
	the system will issue a log event.
	This feature allows the administrator to select per port events and per
	port SMTP events.
	There are 3 events available to pre-define:
Port event selection	Link Up: the system will issue a log message when port connection is up.
	Link Down: the system will issue a log message when port connection is
	down.
	Link Up & Link Down: the system will issue a log message when port
	connection is up or down.
	Disable: it means no event is selected.

4-12