Husky HME-423E Appendix C, Command Set Lists, C-1 Commands Set List, C-2 System Commands Set

Appendix C

Command Set Lists

C-1 Commands Set List

User EXEC	E
Privileged EXEC	P
Global configuration	G
VLAN database	V
Interface configuration	I

C-2 System Commands Set

Commands	Level	Description	Example
show config	E	Show switch configuration	switch>show config
show terminal	P	Show console information	switch#show terminal
write memory	P	Save user configuration	switch#write memory
		into permanent memory
		(flash rom)
system name	G	Configure system name	switch(config)#system name xxx
[System Name]
system location	G	Set switch system	switch(config)#system location xxx
[System Location]		location string
system description	G	Set switch system	switch(config)#system description xxx
[System Description]		description string
system contact	G	Set switch system contact	switch(config)#system contact xxx
[System Contact]		window string
show system-info	E	Show system information	switch>show system-info
ip address	G	Configure the IP address	switch(config)#ip address 192.168.1.1
[Ip-address] [Subnet-mask]		of switch	255.255.255.0 192.168.1.254
[Gateway]
ip dhcp	G	Enable DHCP client	switch(config)#ip dhcp
		function of switch
show ip	P	Show IP information of	switch#show ip
		switch
no ip dhcp	G	Disable DHCP client	switch(config)#no ip dhcp
		function of switch
reload	G	Halt and perform a cold	switch(config)#reload
		restart
default	G	Restore to default	switch(config)#default
admin username	G	Changes a login	switch(config)#admin username xxxxxx
[Username]		username. (maximum 10
		words)
admin password	G	Specifies a password	switch(config)#admin password xxxxxx
[Password]		(maximum 10 words)
show admin	P	Show administrator	switch#show admin
		information
		C-1