Husky HME-421E, HME-423E user manual C-3 Port Commands Set, Portid

			Command Set Lists
dhcpserver enable	G	Enable DHCP Server	switch(config)#dhcpserver enable
Dhcpserver disable	G	Disable DHCP Server	switch(config)#no dhcpserver
dhcpserver lowip	G	Configure low IP address	switch(config)#dhcpserver lowip
[Low IP]		for IP pool	192.168.1.100
dhcpserver highip	G	Configure high IP address	switch(config)#dhcpserver highip
[High IP]		for IP pool	192.168.1.200
dhcpserver subnetmask	G	Configure subnet mask	switch(config)#dhcpserver subnetmask
[Subnet mask]		for DHCP clients	255.255.255.0
dhcpserver gateway	G	Configure gateway for	switch(config)#dhcpserver gateway
[Gateway]		DHCP clients	192.168.1.254
dhcpserver dnsip	G	Configure DNS IP for	switch(config)#dhcpserver dnsip
[DNS IP]		DHCP clients	192.168.1.1
dhcpserver leasetime	G	Configure lease time (in	switch(config)#dhcpserver leasetime 1
[Hours]		hour)
dhcpserver ipbinding	I	Set static IP for DHCP	switch(config)#interface fastEthernet 2
[IP address]		clients by port	switch(config)#dhcpserver ipbinding
			192.168.1.1
show dhcpserver	P	Show configuration of	switch#show dhcpserver configuration
configuration		DHCP server
show dhcpserver clients	P	Show client entries of	switch#show dhcpserver clients
		DHCP server
show dhcpserver ip-binding	P	Show IP-Binding	switch#show dhcpserver ip-binding
		information of DHCP
		server
no dhcpserver	G	Disable DHCP server	switch(config)#no dhcpserver
		function
security enable	G	Enable IP security	switch(config)#security enable
		function
security http	G	Enable IP security of	switch(config)#security http
		HTTP server
security telnet	G	Enable IP security of	switch(config)#security telnet
		telnet server
security ip	G	Set the IP security list	switch(config)#security ip 1
[Index(1..10)] [IP Address]			192.168.1.55
show security	P	Show the information of	switch#show security
		IP security
no security	G	Disable IP security	switch(config)#no security
		function
no security http	G	Disable IP security of	switch(config)#no security http
		HTTP server
no security telnet	G	Disable IP security of	switch(config)#no security telnet
		telnet server

C-3 Port Commands Set

Commands	Level	Description	Example
interface fastEthernet	G	Choose the port for	switch(config)#interface fastEthernet 2
[Portid]		modification.

C-2