JVC KD-SH9750, KD-SH9700 manual Canceling the display, Demonstration, Setting the clock

	Canceling the display
ENGLISH
	demonstration
	When shipped from the factory, display
	demonstration has been activated, and starts
	automatically when no operations are done for
	about 20 seconds.
	• It is recommended to cancel the demonstration
	before you use the unit for the first time.
	To cancel the display demonstration, follow
	the procedure below:
	1 Press and hold SEL (select) for more
		than 2 seconds so that one of the
		PSM items appears on the display.
		(PSM: see page 40.)
			SEL
	2 Press number button 1 to select—
		“MOVIE”—Movie category of the PSM
		settings.

1 2 3 4 5 6

The “Graphics” setting screen appears on the display.

3 Select “Off.”

ATT

4 Finish the setting.

SEL

To activate the display demonstration, repeat the same procedure and select “All Demo” or “Int Demo” in step 3.

•For more details, see “To show the graphics on the display—Graphics” on page 41.

Setting the clock

You can also set the clock system to 24 hours or 12 hours.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 40.)

SEL

2 Press number button 2 to select “CLOCK”—Clock category of the PSM settings.

1 2 3 4 5 6

The “Clock Hr” setting screen appears on the display.

3 Adjust the hour.

ATT

4 Set the minute.

1 Select “Clock Min (minute).”

2 Adjust the minute.

1 2

ATT

8