JVC KD-SH9700 manual Select 4ch for the four, As you rotate it, the car size, Press number button

2 Press number button 6 to enter the further precise setting screen.

6

3 Select your listening seats position.

1 2 3 4 5 6

•Press number button 1 to select “LEFT (front left)” seat.

•Press number button 2 to select “RIGHT (front right)” seat.

•Press number button 3 to select “FRONT” seats.

•Press number button 4 to select “ALL” seats.

Note:

If fader or balance has been set close to its extreme, appropriate effect may not be obtained.

4 Press number button 5 to set the number of the built-in speakers.

• Select “4ch” for the four

5 If you select “4ch,” rotate the control dial to select your car size.

As you rotate it, the car size

ATT changes as follows:

Compact Middle Large

•Compact: Select when the distance from the rear speakers to the listening seat position is shorten than that from the front speakers.

•Middle: Select when the distance from the rear speakers to the listening seat position is almost equal to that from the front speakers.

•Large: Select when the distance from the rear speakers to the listening seat position is longer than that from the front speakers.

Note:

If you have selected “2ch” in the previous step, you cannot select the car size.

To go back to the DSP mode selection screen,

press number button 6.

To exit from the DSP mode selection screen,

press SEL (select) repeatedly or wait for about 15 seconds.

ENGLISH

5

speaker system, and “2ch” for

the two speaker system.

Note:

When “4ch” is selected, rear speakers are used only to reproduce reflections and reverberations in order to creates a being-there feeling in your car compartment.

27