JVC manual External Component Operations, For KD-SH9750, For KD-SH9700

ENGLISH

EXTERNAL COMPONENT OPERATIONS

SRCD

DISP

ATT

BBE

							MODE
SEL	1	2	3	4	5	6	M

Playing an external component

For KD-SH9750:

You can connect an external components to the

LINE IN plugs on the rear.

•If you cannot select “LINE IN” as the source, change the “Line in” setting to “On.” (See pages 40 and 42.)

1 Select the external component (LINE IN).

	Each time you press the
SRC	button, the source changes
	as described on page 7.
	When you select a source,
	the power automatically
	comes on.

For KD-SH9700:

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

•For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component, change the “Ext Input” setting to “Line In.” (See pages 40 and 42.)

If you have assigned a different name to the external component, it will appear.

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

ATT

4 Select the DSP mode and sound mode as you want.

•For the DSP modes, see page 25.

•For the sound (iEQ) modes, see page 28.

Note:

When the source is “LINE IN,” the DISP (D) button will not work.

54