JVC KD-SH9700 manual Downloading images and animations, Press Mode M after the disc is detected

Downloading images and animations

Before starting the following procedure, prepare a CD-ROM including still images (pictures) and animations (movies).

•The supplied Image Converter CD-ROM includes sample images and animations, so you can use this disc as your first trial.

IMPORTANT:

•Still images (pictures) should have <jml>, and animations (movies) should have <jma> as their extension code in their file names.

•Downloading a file can be done only while selecting “CD” as the source; on the other hand, deleting a file can be done while selecting any source.

•Before you download or erase the files, observe the following:

–Do not download a file while driving.

–Do not turn off the ignition key of the car while downloading or erasing a file.*

–Do not detach the control panel while downloading or erasing a file.*

*If you do it, the file download or erasure will not be done correctly. In this case, perform the same procedure again.

•If you have already downloaded an animation for “PowerOn,” “PowerOff,” or “Movie,” downloading a new animation deletes the previously stored animation.

•It takes a long time for the unit to download an animation.

– About 6 to 7 seconds for a still image (one frame).

– About 3 to 4 minutes for an animation of 30 frames.

– About 10 minutes for an animation of 90 frames.

1 Open the control panel.

2 Insert a CD-ROM with the files (images and animations) into the loading slot.

The unit draws the disc, the control panel goes back to the previous position (see page 45)

•If the disc includes playable audio files such as MP3 tracks, playback starts automatically.

3 Press MODE (M) after the disc is detected.

MODE	“Mode” appears on the
M	display, then the number
	buttons and the 5 (up)/

∞(down) buttons start flashing.

4 Press number button 6 to show the download selection screen.

6

CONTINUED ON THE NEXT PAGE

ENGLISH

33