Nortel Networks BCM50 manual To configure Snmp settings, To configure Snmp community strings

140Chapter 14 Using Element Manager to set the basic parameters

Tip: To automatically configure IP Phones with DNs assigned:

1)Set enable registration to ON.

2)Set global registration password to ON.

3)Leave global password field blank.

4)Set auto-assign DN to ON.

Once the IP Phones are operational, set enable registration to OFF.

5You can configure other attributes on the IP Terminal Global Settings tab depending on the requirements for your system.

To configure SNMP settings

1From the Configuration tab, click the Administrator Access folder to expand it.

2Select SNMP from the Administrator Access folder.

3Select the General tab. It is normally selected by default.

4Click Modify in the SNMP Settings area. The Modify SNMP Settings dialog box opens.

5Configure the attributes for Modify SNMP Settings. (see Table 28)

Table 28 Modify SNMP Settings attributes

Attribute	Description
Enable SNMP Agent	Select whether to enable or disable the SNMP agent by clicking the check
	box.
Minimum Required Security	Select the minimum required security for SNMP.
SNMP Version Support	Select the SMNP version support from the dropdown list.

6Click Ok.

To configure SNMP community strings

1From the Configuration tab, click the Administrator Access folder to expand it.

2Select SNMP from the Administrator Access folder.

3Select the Community Strings tab.

4Click Add.... The Add Community String dialog box opens.

N0027152 01