Nortel Networks BCM50 manual Removing an internal component

194Chapter 24 Replacing an internal component

Figure 72 Remove the top of the case

6Lift the top of the case off of the BCM50 unit.

7Continue with the next step, “Removing an internal component”.

Removing an internal component

Use one of the following procedures to remove the component:

•“To remove the hard disk” on page 195

•“To remove the fan” on page 196

•“To remove the router card” on page 197

Warning: Protect the hardware components against damage from electrostatic discharge. Always wear a ground wriststrap before you handle components. Always place the components in static-free container.

N0027152 01