Nortel Networks BCM50 manual Using Telset Administration to set the basic parameters

Chapter 13 Using Telset Administration to set the basic parameters 127

Chapter 13

Using Telset Administration to set the basic parameters

Telset Administration allows you to use a digital telephone with a two-line display to set the BCM50 configuration parameters.

You cannot set all the basic parameters using Telset Administration. Therefore, after configuring the initial parameters, you must use Element Manager to set the startup parameters. Refer to “Configuring the startup parameters” on page 137.

Refer to the BCM50 Telset Administration Guide (N0027176) for more information on Telset Administration.

Figure 53 shows an overview of using Telset Administration to set the basic parameters.

Figure 53 Overview of using Telset Administration

BCM50 Installation and Maintenance Guide