Nortel Networks BCM50 manual To configure the Snmp manager list, To create user accounts

Chapter 14 Using Element Manager to set the basic parameters 141

5Configure the Add Community String attributes. (see Table 29)

Table 29 Add Community String attributes

Attribute	Description
Community String	Enter the entry name used as key to uniquely identify an individual community
	entry on the SNMP agent.
Type of Access	Specify the read and write access for this community. Available options are
	Read Only and Read/Write.

6Click Ok.

7Repeat steps 4 to 6 to add more community strings.

To configure the SNMP manager list

Use the SNMP manager list to specify IP addresses that are allowed to connect to the SNMP agent.

1From the Configuration tab, click the Administrator Access folder to expand it.

2Select SNMP from the Administrator Access folder.

3Select the General tab. It is normally selected by default.

4Click Add... in the SNMP Manager List area. The Add Manager dialog box opens.

5Enter the IP address in the Manager IP Address field.

6Click Ok.

7Repeat steps 3 to 6 to add another manager IP address.

To create user accounts

1From the Configuration tab, click the Administrator Access folder to expand it.

2Select Accounts and Privileges from the Administrator Access folder.

3Select the View by Accounts tab.

4Click Add... to add a user account. The Add Account dialog box opens.

5Configure the Add Account attributes. (see Table 30)

Table 30 Add Account attributes (Sheet 1 of 2)

Attribute	Description
Description	Enter a description for this account.
User ID	Enter a descriptive name for the user or the user function.
Password	Enter a password for this account.
Telset User ID (numeric)	If the user performs administration through the telset interface, enter a number
	for the user ID.
Telset Password (numeric)	Enter a password for the Telset User ID.

BCM50 Installation and Maintenance Guide