Cold Reset Telephony attributes, Attribute | Nortel Networks BCM50

136 Chapter 14 Using Element Manager to set the basic parameters

To configure the modem

1From the Configuration tab, click the Administrator Access folder to expand it.

2Select Modem from the Administrator Access folder.

3Select or deselect the Enable modem checkbox, depending on your system requirements.

For more information on modem configuration, refer to the BCM50 Networking Configuration Guide (N0027156).

To configure the start-up template for telephony services

Note: This procedure erases all the telephony programming that is currently on BCM50 the system.

1From the Administration tab, click the Utilities folder to expand it.

2Select Reset from the Utilities folder.

3Click Cold Reset Telephony Services. The Cold Reset Telephony dialog box opens.

4Configure the Cold Reset Telephony attributes (see Table 23).

Table 23 Cold Reset Telephony attributes

Attribute

Region

Template

Start DN

Description

Specify the startup region.

Specify the startup template.

Specify the startup DN. The default is 221.

5Click Ok.

To initialize voice mail

1From the Configuration tab, click Applications folder to expand it.

2Select Voice Messaging/Call Center from the Applications folder.

3Click Launch CallPilot Manager. The Quick Install Wizard form opens.

If your voice mail system is already initialized, you will not see the Quick Install Wizard. Instead you will see the System Properties web page.

N0027152 01

Image 136

Nortel Networks BCM50 manual To configure the start-up template for telephony services, Cold Reset Telephony attributes

Contents

BCM50 Installation and Maintenance Guide Copyright Nortel Networks Limited N0027152 BCM50 Installation and Maintenance Guide Software License Nortel Networks Installing the main unit Task List Using Element Manager to set the basic parameters Task List Replacing a power supply Task List N0027152 Contents Contents Chapter Viewing the BCM50 system LEDs Chapter Installing the main unit Chapter Configuring the BCM50 system Chapter Connecting the BCM50 system to the LAN and WAN 194 Index Contents N0027152 North American regulatory information Regulatory informationCanadian Notice Federal Communications Commission FCC Notice Ringer Equivalence Number RENEMI/EMC FCC Part Regulatory information Important safety instructions Installation Safety Use of a music source Radio-frequency interference Enhanced 911 configurationTelecommunication registration International regulatory information Additional safety information ITU standardization compliance Chapter Getting started with BCM50About this guide Purpose About BCM50 OrganizationBCM50 key elements BCM50 includes the following key elements BCM50 features Symbols and conventions used in this guide Example Use the info command Whichever set you are usingRelated publications Indicates book titles CallPilot and Call Center Guides How to get help If you do not see an appropriate number in this list, go to 800-4NORTEL Use Express Routing Code ERC 1063# European Free phone 00800 80044-191-555-7980 Emeahelp@nortel.com Mail Getting started with BCM50 N0027152 Introducing the BCM50 hardware Main units BCM50 main unit ports and connectors Introducing the BCM50 hardware Port/connector Description Expansion unit ports/connectors and descriptions Expansion unit and media bay modules Media bay modules Expansion unit Main unit Trunk MBMs Module type What it does Special notes Digital trunk media bay module Brim faceplate Station MBMs Sheet 1 Introducing the BCM50 hardware Station MBMs Sheet 2 DSM Analog station media bay modules ATA2 ASM8 ASM8+ Gasm Gasi BCM50 hardware Rackmount shelf Patch panel Wallmount bracket Wiring field card WFC Wallmount bracket Power supply adapter cord international users Power supplyBCM50 components Uninterruptable power supply Cooling fan Hard diskCooling fan RJ-21 telephony connector Analog telephones Router card Field-replaceable unitsField-replaceable units Telephones and adapters Introducing the BCM50 hardware Media bay modules Introducing the BCM50 hardware ABC Accessories Introducing the BCM50 hardware N0027152 System status LEDs Viewing the BCM50 system LEDsViewing the BCM50 system LEDs System status LEDs during startup or reboot Power Status DescriptionLAN port LEDs System status LEDs states and descriptions LAN port LED locations Status Description Describes the possible Adsl router LED states Adsl router LEDs BCM50a onlyAdsl router LED descriptions Ethernet router LEDs BCM50e only LAN port LED indicatorsDescribes the possible Ethernet router LED states Media bay module LEDs expansion units only Describes the possible MBM LED statesFollowing MBMs have additional LEDs MBM LED descriptions DTM LEDs Describes the functions of the DTM LEDsDTM LED functions Status Descriptions Describes the functions of the Brim LEDs Brim LEDsBrim LED functions Determining Dhcp server configuration and IP address Determining Dhcp server configuration and IP addressBCM50 main unit no integrated router If an external Dhcp server is not present BCM50a or BCM50e with integrated router If an external Dhcp server is present To disable the Dhcp server on the main unit Page Installing the BCM50 system Installing the BCM50 system Tasks Description Link to Supplies, and tools on Installing telephones Installing the BCM50 system N0027152 Checking the installation prerequisites Checking the installation prerequisitesEnvironmental requirements Electrical requirements Site telephony wiring requirements Digital loop System equipment, supplies, and tools Analog loopBasic hardware Optional equipment Other hardware and tools Installing the main unit Shows the steps required to install the main unit Installing the main unit Installing the BCM50 unit in an equipment rackUnpacking the main unit To install the rackmount shelf in an equipment rack Installing the BCM50 unit on the rackmount shelf To install the BCM50 unit on the rackmount shelf Attach the units to the rackmount shelf N0027152 To install the power supply on the rackmount shelf To install a BCM50 unit on top of another unitTo install the patch panel optional Installing the BCM50 unit on the wall To install the BCM50 wallmount bracket Wallmount bracket To install the BCM50 unit on the wallmount bracket Wallmount lock in unlock position Attach the BCM50 unit to the wallmount bracket To install the WFC Installing the wiring field card optionalRepeat for each BCM50 power supply Installing the BCM50 unit on a desktop or shelf To install the BCM50 unit on a desktop or shelf Next step Installing an expansion unit Installing an expansion unit Unpacking the expansion unit Verifying the media bay module switch settings To set Gatm dip switches To set Gasm dip switchesGasm dip switch settings switch Installing the expansion unit Installing a media bay module in an expansion unitTo install a media bay module MBM Installing an expansion unit N0027152 Connecting the cables to the BCM50 system Connecting the cables to the BCM50 system Connecting the expansion unit Expansion unit Connecting the expansion unit to the BCM50 Main Unit To connect an expansion unit Connecting the power supply Default line and extension numbersDefault Extension numbers Line numbers Expansion port To connect a power supply using a UPS To connect a power supply without a UPS Connecting the lines and extensions Wiring warnings Read the warnings in Wiring warnings on To connect the lines and extensions Connecting telephone lines to the expansion units To connect telephone lines to DTM, BRIM, or 4x16 MBMs To connect analog telephone lines to the GATM4 or GATM8 Connecting extensions to the expansion unitsTo connect extensions to DSM16, DSM32, ASM8, or 4x16 MBMs Connecting the auxiliary equipment Connecting an auxiliary ringer Connecting an external paging system To install an auxiliary ringerTo install an external paging system Connecting an external music source Tip Paging tips To connect the music source using the music source jack Music source jack To connect the cables to the wiring field card optional To connect the cables to the patch panel optional Next step System telephones Installing telephones and peripheralsAnalog terminal adapter Installing an emergency telephone To install the emergency telephoneInstalling telephones and peripherals Central Answering Position CAP/eCAP Installing IP Phones Installing T7406 cordless systems Installing telephones and peripherals N0027152 Installing the analog terminal adapter Configuration overviewRefer to on page 45 for ATA2 specifications Analog telephone Installing the ATA2 Connecting the ATA2This section provides information on installing the ATA2 Installing the analog terminal adapter Chapter Installing the analog terminal adapter To connect the ATA2Mounting the ATA2 To mount the ATA2 on a wall Test insertion loss measurement ATA2 back view Mounting keyhole slots Configuring the ATA2 Installing the analog terminal adapter N0027152 Configuring the BCM50 system Configuring the BCM50 system Initial parameters overview Initial parameters Startup parameters overview Startup parameters Configuring the BCM50 system N0027152 Using Telset Administration to set the basic parameters Using Telset Administration to set the basic parameters To configure the IP address Configuring the initial parametersTo enter the keycodes To configure the modem To select the region To initialize voice mail To select the telephony startup template and startDNTo create Telset user accounts Next step Page Using Element Manager to set the basic parameters Using Element Manager to set the basic parameters To download and install Element Manager Accessing the BCM50 systemTo connect to the BCM50 system Modify IP Settings attributes To configure the IP subsystemAttribute Description Cold Reset Telephony attributes To configure the start-up template for telephony servicesAttribute Configuring the startup parameters Click InstallQuick Install Wizard attributes To enter a name for your system To configure Dhcp server settings To configure the date and time settingsDate and Time attributes To configure IP Phones Configure the Dhcp server attributes see TableDhcp server general settings attributes IP Terminal Global Settings attributes To configure Snmp settings To configure Snmp community stringsModify Snmp Settings attributes Click Add.... The Add Community String dialog box opens To configure the Snmp manager list Configure the Add Community String attributes. see TableTo create user accounts Click Ok Repeat steps 4 to 6 to add more community strings Click Ok Repeat steps 4 to 6 to create more user accounts Using the Startup Profile to configure parameters Using the Startup Profile to configure parameters Startup Profile requirements To download the Startup Profile template Configuring basic parametersTo customize a Startup Profile for your system To load the Startup Profile data onto the BCM50 system Next step Using the Startup Profile to configure parameters N0027152 Completing the initial installation optional Completing the initial installation optional Configuring the media bay module To configure the MBMs Checking for software updates Configuring modem settingsConfiguring voice mail Performing a backup Customizing security policies Connecting the BCM50 system to the LAN and WAN Connecting the BCM50 system to the LAN and WAN Connecting the BCM50 system to the LAN Describes the function and use of each of the portsLAN ports on the main unit Sheet 1 Port name Function To connect the BCM50 system to the LAN LAN ports on the main unit Sheet 2 Connecting the BCM50 system to the WAN To connect the BCM50e main unit to the WANBCM50a main unit BCM50e main unit To connect the BCM50a main unit to the WAN Proceed to Next step Connecting the BCM50 system to the LAN and WAN N0027152 Testing basic BCM50 functionality Testing basic BCM50 functionalityTo test the main unit To troubleshoot the main unit To test the main unit without a valid keycodeTo test the expansion unit To test the MBM To troubleshoot the expansion unitTo test a station MBM To determine why the ATA2 does not function To determine why an MBM does not appear in Element ManagerTo test a trunk MBM To determine why there is no dial tone at the ATA2 Reset to factory settingsTo check the ATA2 wiring Activate the reset feature Reset levelsTo perform a Level 1 and Level 2 reset Set Testing basic BCM50 functionality Level 1 reset Level 2 reset Replacing the BCM50 system components Replacing the BCM50 system components Replacing the BCM50 system components N0027152 Replacing a power supply Replacing a power supply Preparing the system for maintenance Removing the power supplyTo remove the power supply Check for a recent backup of the BCM50 system programming To connect the new power supply Connect the new power supplyReturning the system to operation Replacing a power supply N0027152 Replacing a main unit Replacing a main unit To disconnect the cables To remove a rackmounted main unit Removing the main unitTo remove a wallmounted main unit To remove a desktop mounted main unit Installing the new main unitTo connect the cables To return the system to operation Replacing a main unit N0027152 Replacing a media bay module Refer to the following procedures to replace an MBMReplacing a media bay module To remove the MBM Remove an MBM To insert the new MBM Replacing a media bay module N0027152 Replacing an expansion unit Replacing an expansion unit Removing the expansion unit Disconnecting the cablesTo disconnect the expansion unit cables To remove a wallmounted expansion unit To remove a rackmounted expansion unitTo remove a desktop-mounted expansion unit Removing the MBM Inserting the MBM in the new expansion unit Installing the new expansion unit Replacing an expansion unit Replacing an internal component Replacing an internal component Special tools Removing the main unit Opening the main unit case To remove a desktop-mounted main unitTo open the main unit case Ensure that all the cables are removed from the main unit BCM50 case screws Removing an internal component Use one of the following procedures to remove the componentLift the top of the case off of the BCM50 unit To remove the hard disk Hard disk cables To remove the fan Hard disk and bracket screws To remove the router card Fan Inserting the new component To insert the new hard disk Insert screws Perform a restore or manual reprogram of the system To insert the new fan To insert the new router card Closing the main unit caseTo close the main unit case Installing the main unit Replacing the top of the case To return the BCM50 system to operation Replacing an internal component Appendix a RJ-21 telephony connector wiring chart RJ-21 telephony connector wiring chartAppendix a RJ-21 telephony connector wiring Sheet 2 LAN ports wiring chart Appendix B LAN ports wiring chartAppendix B BCM50a BCM50e LAN port wiring Lists the wiring details for the LAN portsPin Signal WAN ports wiring chart On page 210 list the wiring details for the WAN portsAppendix C WAN ports wiring chart RJ-11 WAN port wiring RJ-45 WAN port wiring Expansion ports wiring chart Lists the wiring details for the expansion portsAppendix D Expansion ports wiring chart Expansion port wiring Sheet 1 FS256 Receive Data + FS256 Receive Data DTM wiring chart Appendix E DTM wiring chartDefault line numbers on Line type Expansion port Appendix E Appendix E DTM wiring chart N0027152 Brim wiring chart On page 216 list the wiring details for the RJ-45 portsAppendix F Brim wiring chart Brim RJ-45 port wiring Appendix F Brim wiring chart Brim line numbering Default line numbers on Port number Expansion port Gatm wiring chart Appendix G Gatm wiring chartGATM4 RJ-21 connector wiring Sheet 1 Appendix G GATM8 RJ-21 connector wiring Sheet 1 Ring Slate-Violet Appendix G Gatm wiring chart N0027152 4x16 wiring charts Appendix H 4x16 wiring charts4x16 RJ-11 port wiring Appendix H Lists the wiring details for the RJ-21 connector on Appendix H 4x16 wiring charts 4x16 default line numbering4x16 RJ-21 connector wiring Sheet 1 Default line number on Port number Expansion port Tip Black-Brown Appendix H 4x16 wiring charts N0027152 DSM16 and DSM32 wiring charts Appendix I DSM16 and DSM32 wiring chartsDSM16 and DSM32 RJ-21 connector wiring Sheet 1 Appendix Set Pin Connection Wire color RJ-21 241242 243 ASM8, ASM8+, and Gasm wiring chart Lists the wiring details for the RJ-21 connector on the ASMAppendix J ASM8, ASM8+, and Gasm wiring chart ASM RJ-21 connector wiring Sheet 1 Default DN on Set Pin Connection Expansion port No connection Violet-Slate Slate-Violet Appendix K Regional default system valuesSystem region attributes Regional language default values Default languages by regionAppendix K System region attributes South/Central America language support Regional caller ID display formats Regional companding lawRegional media bay module availability Companding law by region Shows the PRI line protocol support by region Regional PRI line protocol supportPRI line protocol supported, by region Sheet 1 Isdn line services Isdn line servicesMcdn over PRI SL-1 Protocol Region Available Isdn services Define time zones by country and languageTime/date formats based on language Language/Country Time/Date format System defaults Region defaults Sheet 1 Appendix K System region attributes Region defaults Sheet 2 Restriction filter defaultsDefault dialing restrictions, by profile Digital trunk types Provides a description of the types of digital trunk typesDigital trunk types and descriptions Sheet 1 Digital trunk Description Types CallPilot region default languages by country Default voice mailCallPilot regions Analog trunk types CallPilot feature default anomalies Spain Sweden Switzerland Appendix K System region attributes N0027152 Index Numerics Index Dhcp LED PRI CAP Index N0027152