Nortel Networks BCM50 manual Configuring the startup parameters, To enter a name for your system

Chapter 14 Using Element Manager to set the basic parameters 137

4Configure the attributes on the Quick Install Wizard form (see Table 24).

Table 24 Quick Install Wizard attributes

Attribute	Description
Attendant DN	Enter the extension number of the attendant or operator assigned to CallPilot.
Primary UI Style	Select the mailbox user interface used as a default for the mailboxes.
	If you select NVM, the mailbox user interface uses Norstar voice mail voice and text
	prompts.
	If you select CallPilot, the mailbox user interface uses CallPilot voice and text
	prompts.
Primary Language	Select the language used as the primary language for the mailboxes.
From Line	Enter the line number of the first line in the range of lines you want CallPilot to
	answer. CallPilot answers the range of lines between this line and the line you
	enter in the To Line box.
To Line	Enter the line number of the last line in the range of lines you want CallPilot to
	answer.
Number of rings	Enter the number of rings you want CallPilot to wait before answering lines.

5Click Install.

Configuring the startup parameters

Use the following procedures to configure the startup parameters for the BCM50 using Element Manager:

•“To enter a name for your system”

•“To configure the date and time settings” on page 138

•“To configure DHCP server settings” on page 138

•“To configure IP Phones” on page 139

•“To configure SNMP settings” on page 140

•“To configure SNMP community strings” on page 140

•“To configure the SNMP manager list” on page 141

•“To create user accounts” on page 141

To enter a name for your system

1From the Configuration tab, click the System folder to expand it.

2Select Identification from the System folder.

3Enter a name for your system in the System name field.

BCM50 Installation and Maintenance Guide