Nortel Networks Adsl router LEDs BCM50a only, Describes the possible Adsl router LED states

62Chapter 3 Viewing the BCM50 system LEDs

ADSL router LEDs (BCM50a only)

The three ADSL router LEDs on the faceplate of the BCM50a main unit monitor router status, data, and DSL. Figure 22 shows the location of the three ADSL router LEDs.

Figure 22 ADSL router LEDs on the BCM50a main unit

Router

status Data DSL

Table 11 describes the possible ADSL router LED states.

Table 11 ADSL router LED descriptions

LED	Status	Description
	On	The router card is functioning properly.
Router
	Off	The router card is not ready or has malfunctioned.
status
	Flashing	The router card is rebooting.
Data	Flashing	The router card is sending/receiving data through the WAN port.
	Off	The router card is not sending/receiving data through the WAN port.
	On	The router card is linked successfully to a digital subscriber line access
		multiplexer (DSLAM).
DSL
	Off	The DSL link is down.
	Flashing	The router card is initializing the DSL line.

N0027152 01