Nortel Networks BCM50 manual System defaults, Region defaults Sheet 1

Appendix K System region attributes 235

System defaults

Table 58 compares the system defaults for the North American, Global and UK regions. In addition, the following functionality applies:

•Regions for Denmark, Holland and Sweden are the same as the Global region except for the default to local languages and local tones and cadences.

•The Region for the Caribbean is the same as the North American region except that it supports the M7000 telephone.

•The Region for CALA is the same as the Caribbean region, except NI ISDN is replaced by ETSI ISDN (u-law).

Table 58 Region defaults (Sheet 1 of 2)

Functionality	Attribute	North American	Global	United Kingdom
Direct Dial Access code		0	0	0
DTMF parameters	Tone duration	120 msec	120 msec	120 msec
	Pause time	1.5	1.5	3.5
	Interdigit time	80 msec	80 msec	100 msec
Conference tone		disabled	disabled	enabled
PCM Companding Law		mu-law	a-law EBI	a-law EBI
OLI digits		variable length	variable length to	variable length to a
		digits:minimum=	a maximum of 15	maximum of 15
		DN length,	digits	digits
		maximum=10
Dial Tone Detection		enabled	enabled	enabled
Hunt Groups	Default delay	4 ring cycles	4 ring cycles	4 ring cycles
	Queue timeout	60 sec	60 sec	60 sec
	If busy	busy tone	busy tone	busy tone
	Mode	broadcast	broadcast	sequential
Target line if busy setting		prime	prime	busy tone
M7000 set		disabled	enabled	enabled
Fax switch		enabled	enabled	enabled
Service Schedule time	Night	start 23:00	start 23:00	start 23:00
		end 07:00	end 07:00	end 07:00
	Evening	start 17:00	start 17:00	start 17:00
		end 23:00	end 23:00	end 23:00
	Lunch	start 12:00	start 12:00	start 12:00
		end 13:00	end 13:00	end 13:00
	Service 4	start 00:00	start 00:00	start 00:00
		end 00:00	end 00:00	end 00:00
	Service 5	start 00:00	start 00:00	start 00:00
		end 00:00	end 00:00	end 00:00
	Service 6	start 00:00	start 00:00	start 00:00
		end 00:00	end 00:00	end 00:00
Call Forward Delay	Default	disabled	disabled	disabled

BCM50 Installation and Maintenance Guide