Nortel Networks BCM50 manual Configuring the initial parameters, To enter the keycodes

128Chapter 13 Using Telset Administration to set the basic parameters

Configuring the initial parameters

Use the following procedures to configure the initial parameters for the BCM50 using Telset Administration:

•“To enter the keycodes”

•“To configure the IP address”

•“To configure the modem” on page 129

•“To select the region” on page 129

•“To select the telephony startup template and startDN” on page 130

•“To initialize voice mail” on page 130

•“To create Telset user accounts” on page 130

To enter the keycodes

1Select Feature 9*8 from a two-line display telephone.

2Enter the following user ID and password: User ID: SETNNA

Password: CONFIG

The numerical values of the user ID and password are 738662 and 266344, respectively.

3Press NEXT to scroll through the menu and select Feature Codes.

4Press OK.

5Press NEXT to scroll through the list and do one of the following:

a If you want to enter keycodes to activate features, select Feature List.

•Press SHOW to view the available features.

•Use the soft keys to activate features for your system.

bIf you want to modify existing keycodes, select Keycode.

•Press SHOW to view the keycodes.

•Use the soft keys to modify existing keycodes for your system.

Refer to the BCM50 Keycode Installation Guide (N0016865) for details on how to retrieve and enter the keycodes for your system.

To configure the IP address

1Select Feature 9*8 from a two-line display telephone.

2Enter the following user ID and password: User ID: SETNNA

Password: CONFIG

The numerical values of the user ID and password are 738662 and 266344, respectively.

3Press NEXT to scroll through the menu and select IP Address.

N0027152 01