Nortel Networks manual Attach the BCM50 unit to the wallmount bracket

Chapter 7 Installing the main unit 87

Figure 34 Attach the BCM50 unit to the wallmount bracket

4Press the unit against the wallmount bracket and slide the unit down until it clicks in place.

5Slide the wallmount lock to the left (lock position). See Figure 35.

Figure 35 Wallmount lock in lock position

6Use the supplied screw to secure the wallmount lock in position.

7Repeat steps 1 to 6 for each additional BCM50 unit you are installing.

8Install the BCM50 power supply using a method appropriate for your environment. The power supply must be within 1.5 m (5 feet) of the BCM50 unit and within 1.5 m (5 feet) of the ac power outlet (wall outlet or UPS).

BCM50 Installation and Maintenance Guide