Basic Operation
Turning Off the Projector
1 | Press the |
|
|
|
|
|
|
|
| ||
on the remote control, and Power off? appears on the |
|
|
|
| |
| screen. |
|
|
|
|
2 | Press the |
|
|
|
|
|
|
|
| ||
|
|
|
| ||
projector. The POWER indicator starts to blink red, and |
|
|
|
| |
| the cooling fans keep running. (You can select the level |
|
|
|
|
| of fans’ quietness and speed. See “Fan” on page 55.) |
|
|
|
|
| Power off? disappears after 4 seconds. | ||||
| At this time, you can unplug the AC power cord even if | ||||
| the fans are still running. |
|
|
|
|
3 | When the projector has cooled down enough, the |
|
|
|
|
POWER indicator stops blinking and you can turn on |
|
|
|
| |
the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN
HOUR IN EVERY 24 HOURS.
Note:
•When the On start function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.50).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING indicator blinks or lights red, see “WARNING indicator” on page 58.
•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal
20
