Eiki LC-XE10 instruction manual Laser Pointer Function, Part Names and Functions

Part Names and Functions

Laser Pointer Function

This remote control emits a laser beam as Laser pointer function from the laser light window. When the LASER button is pressed, laser light goes on. When the LASER button is being pressed for more than 1 minute or the LASER button is released, light goes off. The signal emission indicator lights red and laser is emitted with red light to indicate laser beam is being emitted.

The laser emitted is a class II laser; therefore, do not look into the laser light window or shine the laser beam on yourself or other people. The marks below are caution labels for laser beam.

CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not look into the laser light window while laser is emitting, otherwise eye damage may result.

These caution labels are put on the remote control.

Signal Emission Indicator

Laser Light Window

Pointer Function

You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. (See “Pointer” on page 41 for changing the patterns and sizes.)

1While pressing the MENU button, hold down the NO SHOW button for more than 7 seconds so that the Pointer function can be available. (The Laser pointer function has switched to the Pointer function.)

2Press the LASER button on the remote control toward the projector and see if the LASER button lights green, and Spotlight or Pointer is displayed on the screen. Then you can move Spotlight or Pointer with the PRESENTATION POINTER button. If the LASER button does not light green and still emits laser beam, the Laser pointer function has not switched to the Pointer function yet. Try these steps until the LASER button lights green.

3To clear Spotlight or Pointer displayed on the screen, press the LASER button toward the projector and see if the LASER button turns off.

To use the Laser pointer function once again, while pressing the MENU button, hold down the NO SHOW button for more than 7 seconds.

		AUTO PC	ON-OFF
	▲
D. ZOOM		FREEZE	NO SHOW	NO SHOW button (2)
	▲		P -TIMER
		IMAGE
	▲
	PAGE	AUTO SET	MUTE
	▲
		▲
	-		V
	E		O	PRESENTATION POINTER button (4)
	M
▲			▲
	L
	U
	O		E
	V		+
		▲
	MENU	SELECT	R-CLICK	MENU button (1)
K E YSTONE		L ASER	COMPUTER 1
		AUTO PC	ON-OFF
	▲
D. ZOOM		FREEZE	NO SHOW
	▲		P -TIMER
		IMAGE
	▲
	PAGE	AUTO SET	MUTE
	▲

▲

NOTE

●You can choose the size of Spotlight (Large, Middle, and Small) and the pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See “Pointer” on page 41.

	-		V
	E		L
	M		O
▲			▲
	U
	L		+
	O
	V
		▲
	MENU	SELECT	R-CLICK
K E YSTONE		L ASER	COMPUTER 1
			COMPUTER 2

PRESENTATION POINTER button (4)

LASER button (3)

After the Laser pointer function has switched to the Pointer function, the LASER button is used as the Pointer function ON-OFF switch instead of the Laser pointer function.

Press the LASER button toward the projector and see if it lights green.

13