PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10 degrees.
1 | Lift the front of a projector and pull FEET LOCK LATCHES |
| on the both sides of a projector. |
2 | Release FEET LOCK LATCHES to lock ADJUSTABLE FEET |
| and rotate ADJUSTABLE FEET to fine tune position and tilt. |
3 | To retract ADJUSTABLE FEET, lift the front of a projector |
| and pull and undo FEET LOCK LATCHES. |
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 36.)
NOTE :
THIS PROJECTOR SHOULD BE SET IN THE WAY
INDICATED. PROJECTION LAMP MAY MALFUNCTION. | FEET LOCK |
ADJUSTABLE FEET | LATCHES |
MOVING PROJECTOR
Use Carry Handle when moving a projector.
When moving a projector, replace Lens Cap and retract Adjustable Feet to prevent damage to the lens and cabinet.
When a projector is not in use for an extended period, put it into the case (dust cover) supplied with a projector.
CAUTION
Dust Cover (supplied) is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this cover. The projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
●Do not drop or bump a projector, otherwise damages or malfunctions may result.
●When carrying a projector, use a suitable carrying case.
●Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.
10
