Eiki LC-XG110 Computer Input, Selecting Input Source, Rgb, RGB Scart, Input Menu

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing COMPUTER 1 or COMPUTER 2 button on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

MENU OPERATION

When connect the output (Analog) from computer to Computer 1 (HDB 15-pin) terminal on the projector.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to
	Computer 1 and then press SELECT button. Source Select
	Menu will appear.
3	Press POINT DOWN button and a red-arrow icon will appear.
	Move arrow to "RGB" and press SELECT button.
		When computer is connected to Computer 1, select
RGB
		RGB.
		When video equipment is connected to Computer 1
RGB (Scart)
		terminal, select RGB (Scart). Refer to P31.
		Closes SOURCE SELECT menu.
	Quit

When connect the output (Digital/Analog) from computer to Computer 2 (DVI-I) terminal on the projector.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to
	Computer 2 and then press SELECT button. Source Select
	Menu will appear.
3	Move a pointer to either RGB (Digital) or RGB (Analog) and then
	press SELECT button.
		When digital signal is connected to DVI terminal,
RGB (Digital)
		select Digital.
		When analog signal is connected to DVI terminal,
RGB (Analog)
		select Analog.

INPUT button

Computer 1

Computer 2

Video

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Computer 1 and press SELECT button.

Computer 1

Source Select Menu

Move a pointer to RGB and press SELECT button.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Computer 2 and press SELECT button.

Computer 2

Source Select Menu

Move a pointer to RGB (Digital) or RGB (Analog) and press SELECT button.

Quit

Closes SOURCE SELECT menu.

22