Eizo CG222W manual Connecting Two PCs to the Monitor, Connection examples, Selecting input signal

2. Installation

2. Installation

2-1. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor.

Connection examples

SIGNAL1 SIGNAL2

	PC 1		PC 2
	Signal Cable	Signal Cable	D-Sub
	(FD-C39 enclosed)	(FD-C16 enclosed)		Analog
(Ex.1) Digital	DVI		mini 15
			pin
	Signal Cable	Signal Cable
	D-Sub(FD-C16 enclosed)	(FD-C16 optional)	D-Sub
(Ex.2) Analog	mini 15		mini 15	Analog
	pin		pin

Selecting input signal

Switch the input signal with . Input signal switches each time is pressed. When the signal is switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the screen.

Input Signal Selection button

This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the <Input Priority> setting (see table below). Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal.

In this case of only one signal being present at either input, the monitor automatically detects and displays that signal.