2. Installation
9
Priority setting Performance
1 If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
When the power of the monitor is turned ON.
When the signal input to Signal 1 is changed even if active input was
Signal 2.
2 If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
When the power of the monitor is turned ON.
When the signal input to Signal 2 is changed even if active input was
Signal 1.
Manual The monitor will not detect signals automatically in this mode. Select the
active input by pressing .
Note
When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are
in power saving mode.