27
Chapter 3 Setting Monitor
3-5. Setting Language [Language]
This function allows you to select a langua ge for the adjustment menu or displaying message.

Selectable languages

English/German/ French/Spanish/Italian/Swedish /Japanese /Simplied Chinese/Traditional Chi nese
Procedure
Choose <Menu Settings> menu from the Adjustme nt menu, and press .
Choose <Language> from the <Menu Sett ings> menu, and press .
Choose a language with or .
Press to exit t he adjustment.
3-6. Setting Range of Frequency [Signal Bandwidth]
Depending upon your operating e nvironment, it may be necessary t o set the frequency that corres ponds
to your graphics board. If you instal l it for the rst time or change environment, set the mon itor.
NOTE
Refer to the manual of the graphics b oard.
These environment desc ribed below can be set regardless of whet her or not the computer is run ning.
Only digital input signals c an be set up.
•
•
•
Procedure
Press to turn off the monitor.
Press holding down at least 2 seconds to tu rn on the monitor.
The Optional Setting s menu appears.
Choose <Signal Baldwidth> from the <Optiona l Settings> menu, and press .
Select “Normal” or “Wide” with or , and press .
Use or to select (or just conrm) the frequency that corresponds to your graph ics board.
Setting CG223W CG243W
Horizontal scanning
frequency (kHz) Vertic al scanning
frequency (Hz) Horizontal scanning
frequency (kHz) Vertic al scanning
frequency (Hz)
Normal 31 - 65 59 - 61 2 6 - 78 59 - 61
Wide 31 - 65 47.5 - 61 26 - 78 23.75 - 63
Select “Finish” with or .
Press to exit t he Optional Settings.
The Optional Settings menu is closed.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.