7
Chapter 1 Introduction
1-2. Controls and Functions

Ex. CG243W

16
12
19
18
17
11 13 15
1 2 3 4 5 6 7 8 9 10 14
DVI-1 DVI-2
Disply-Port
POWER INPUT
1Sensor (AutoEcoView) Detects ambient brig htness. Auto EcoView function
2 button Switches input signals for display when more than two PC s are
connected to the monitor.
3 button Allows you to switch the Color Mode.
4 button Displays the information about monitor or input signals.
5 button Adjusts the brightness.
6 button Cancels the adjustment/setting or exit the adjus tment menu.
7 buttons Chooses an adjustment item or increases/decreases a djusted values
for advanced adjustments using the Adjustment menu.
8 button Displays the Adjustment menu, determines an item on the menu scree n,
and saves values adjusted.
9 button Turns the power on or off.
10 Power indicator Indicates monitor’s operation status.
Blue : Operating
Flashing blue
(2 times for each)
: When the timer is set for ColorNavigator, noties
that a recalibration is required (for CAL mode).
Orange : Power saving
Off : Power off
11 Main Power switch Turns the main power on or off.
12 Power connector Connects the power cord.
13 Input signal connectors Display Port Connector x 1
14 Input signal connectors DVI-I Connector x 2
15 USB port (Up) Connects the USB cable to use the softwar e that needs USB
connection, or to use USB Hub function.
16 USB port (Down) Connects a peripheral USB dirive.
17 Stand Used to adjust the height and angle of the monitor screen.
18 Security lock slot Complies with Kensington's MicroSaver securit y system.
19 Cable holder Covers the monitor cables.
Adjustment menu