Chapter 1 Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
•22” wide format LCD (CG223W) / 24” wide format LCD (CG243W)
•Wide color gamut of 95% of Adobe RGB (CG223W) / 98% (CG243W)
•Applicable to the resolution of 1680 dots x 1050 lines (CG223W) / 1920 dots x 1200 lines (CG243W)
•HDCP
•Frame Synchronous mode supported : 47.5 - 61Hz (CG223W)
:23.75 - 30.5Hz, 47.5 - 61Hz (CG243W)
•Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
•3 signal input terminals
•Color Mode function reproduces color gamut and gamma compliant with
•Attaching the “Adjustment Certificate” to describe the grayscale and uniformity characteristics of the monitor individually
•Portrait/Landscape display available (rotate 90 degrees clockwise)
•Monitor hood attached
•The provided “ColorNavigator” calibration software enables you to calibrate monitor characteristics and generate color profiles
•Color Vision Deficiency Simulation Software "UniColor Pro" supported
This software can be downloaded from http://www.eizo.com
• Power saving function
This product is equipped with power saving function.
-- Power Consumption when main power switch is Off: 0W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
-- Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably.
Excessively high brightness may lead a damage to the natural environment as well as to your eyes. Suppressing the excessively high brightness will be helpful to reduce the power consumption and the damage to your eyes.
NOTE
•This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (Refer to “To set the orientation of the Adjustment menu [Orientation]” on page 26.)
•For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC. Refer to the manual of the graphics board for details.
6 | Chapter 1 Introduction |