9
Chapter2MonitorAdjustmentandSettings

2-2. Adjusting Screens

●Digital Signal Input
When digital signals are input, images are d isplayed correctly based on the preset data of the monitor.
●Analog Signal Input
Attention
• It takes about 30 m inutes for the performance of elect rical parts to stabiliz e. Please wait 30 minutes or more after the
monitor power has been turned on, a nd then adjust the monitor.
• The self adjust ment function does not work for the image s under the vertical resolution of 480 or less.
• The self adjust ment and auto adjustment fu nctions work correctly when an image i s fully displayed over the Windows
display area. They do not work properly in the case s below:
-When an image is displayed only on a part of th e screen (command prompt window, for example)
-When a black background (wallpaper, etc.) is in use
Also, these functions cannot work pr operly in some graphic boards.
The monitor screen adjustment is used to suppress  ickering of the screen or adjust screen position and screen
size correctly according to the PC to be used.
Note
• The self adjust ment function works when all of the following c onditions are satised:
-When a signal is input into the monitor for the  rst time or when a resolution or vertica l/horizontal scan f requency not
used before is set
If the screen is not displayed correctly even after perfor ming the self adjustment operation, adjust the sc reen
according to the procedures on the following pages to use the mon itor comfortably.
Procedure
1. Press on the front of the monitor.
The auto adjustment function works (a message is d isplayed during execution) to correctly a djust the ickering, screen
position, and screen size correctly.

2-3. Adjusting Brightness (Brilliance)

The screen brightness (brillia nce) is adjusted by changing the brightness (brill iance) of the backlight (light source
from the LCD backpanel).
Attention
• It takes about 30 m inutes for the performance of elect rical parts to stabiliz e. Please wait 30 minutes or more after the
monitor power has been turned on, a nd then adjust the monitor.
• Adjustment ca nnot be performed if no signal is i nput to the monitor or a signal outside the speci ed range is input.
Adjustable range
0 to 100%
Procedure
1. Press / (BRILLIANCE) on the front of the monitor.
The Adjustment menu appears. (The value s shown in “%” are available only as references.)
2. Use or for adjustment.
Attention
• The Adjustme nt menu may not appear in some cases.