7. ATTACHING AN ARM STAND
The LCD monitor can be used with an arm stand by removing the tilt stand and attaching the arm stand to the LCD monitor.
NOTE
´Use an arm stand that satisfies the followings.
•When using the LCD monitor with an arm stand,the arm stand must be VESA approved :
*Use an arm stand with a 100 mm x 100 mm hole spacing on the arm mounting pad.
*Use an arm stand that is able to support an object weighing 13.5 kg.
´TÜV/GS approved arm stand.
´Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.
´Use an arm stand remaining that position where it is manually moved.
´Use an arm stand with the ability to tilt the monitor forward and backward.
´Use an arm stand less than or equal to 500 mm in relation to the desk surface when the arm stand is in its lowest position.
´Please connect cables after attaching an arm stand.
M4 x 12 mm x 4
100 mm 
100 mm
500 mm or less
(Example)
ENGLISH
Setup Procedure
1. Lay the LCD monitor down as shown below. Do not scratch the panel.
Soft Cloth or
Cushion
7. ATTACHING AN ARN STAND 33