WARNING
•Use the enclosed power cord. If using the power cord other than the enclosed one, follow these guidelines.
[USA and Canada]
Use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting the following specifications.
* | Rating: | min. 125 V, 10 A | *Length: max. 2.0 m |
* | Plug type: | NEMA | |
* Type: | SVT |
| |
[Europe] |
|
| |
Use a proper European standard approved power cord meeting the | |||
following specifications. |
| ||
* | Rating: | min. 250 V, 10 A | *Length: max. 2.0 m |
* Type: |
| ||
Use a plug type approved by the country where you reside. Failure to do so may cause fire or electric shock.
´ To disconnect the power cord, grasp the plug firmly and pull. |
|
Never tug on the cord, doing so may cause damage and could result in | OK |
fire or electric shock. |
´ The equipment must be connected to a grounded main outlet.
´ Use the correct voltage.
*The monitor is designed for use with a specific voltage only. Connection to a different voltage may cause fire, electric shock, or other damage.
*Do not overload your power circuit, as this may result in fire or electric shock.
*For proper connections of the power cord, be certain to plug the power cord to the provided monitor connector and directly to a wall outlet. Not doing so may result in fire or electric shock.
´ Handle the power cord with care.
* Do not place the cord underneath the monitor or other heavy objects. * Do not pull on the cord.
* Do not attempt to repair a damaged cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock.
´Never touch the plug and power cord if it begins to thunder.
If it begins to thunder, do not touch the plug, power cord or cable. Touching them may result in electric shock.
6 PRECAUTIONS