2-2. Getting Ready for Operation
Try each setting procedure if necessary in the following cases.
The display image size and / or position is incorrect
Press the AUTO-SIZING button on the front panel. The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO-SIZING button whenever changing the graphics board or the resolution p.30), or when image size and/or position is incorrect. If further adjustment is required, adjust the picture size/position as desired using the ScreenManager (See page 14).
•A solid-color screen (i.e. red, green, blue) may appear briefly after pressing the AUTO-SIZING button. This is not a malfunction.
The displaying area is too large or too small
The following look-up table shows the maximum (non-interlaced) vertical refresh rates for this model with regard to standard resolutions set forth by VESA. The best way to see if the monitor will work with a given resolution and rate, is to compare the vertical refresh rate of the graphics board to the monitor’s range. Refer to the graphics board manual for specifications. If the refresh rate is within the specified range of the monitor, it should operate properly.
Horizontal Scan | Maximum Vertical Refresh rate (Hz) | |
Frequency (kHz) | | | | | |
| 640 x 480 | 800 x 600 | 1024 x 768 | 1280 x 1024 | 1600 x 1200 |
| | | | | |
30-96 | 160 | 144 | 118 | 89 | 76 |
| | | | | |
Using the monitor with Windows® 95/98/2000
A monitor information file is contained in the EIZO CRT Utility Disk included with the monitor. It includes all the required information for best operation with Windows 95/98/ 2000. Please install the enclosed utility and select your model name from the monitor list in Windows 95/98/2000. For installation procedure, please read the readme.txt file in the utility disk.
ENGLISH