Problems

Points to check with possible solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. The image vibrates on

Check that the signal cable is properly connected to the

 

 

the screen.

PC or graphics board.

 

 

 

 

 

 

 

 

 

 

 

 

 

The monitor may be located close to a device that is

 

 

 

 

 

 

 

 

 

 

 

 

 

generating a magnetic field. Such devices include

 

 

 

 

 

 

 

 

 

 

 

 

 

speakers (other than the EIZO optional i·Sound

 

 

 

 

 

 

 

 

 

 

 

 

 

speaker), electric motors, high-voltage cables, and

 

 

 

 

 

 

 

 

 

 

 

 

 

other monitors. It may be solved by turning off or

 

 

 

 

 

 

 

 

 

 

 

 

 

moving the interfering device, or by relocating the

 

 

 

 

 

 

 

 

 

 

 

 

 

monitor.

 

 

 

 

 

 

 

 

 

 

 

 

 

Use of the “Moiré” adjustment may cause a slight

 

 

 

 

 

 

 

 

 

 

 

 

 

vibration. To eliminate the vibration, set the

 

 

 

 

 

 

 

 

 

 

 

 

 

adjustment level to lower percentage or 0%. (p.15)

 

 

 

 

 

 

 

 

 

 

 

 

 

If the volume level of the EIZO optional i·Sound

 

 

 

 

 

 

 

 

 

 

 

 

 

speaker is too high, it may, in some cases, cause a

 

 

 

 

 

 

 

 

 

 

 

 

 

slight vibration. To eliminate, turn down the volume

 

 

 

 

 

 

 

 

 

 

 

 

 

of the speaker.

 

4.

The image is flickering.

Flicker will occur with interlaced scanning, or non-

 

 

 

 

 

 

 

 

 

 

 

 

 

interlaced scanning with a low refresh rate. All EIZO

 

 

 

 

 

 

 

 

 

 

 

 

 

monitors are capable of reproducing high refresh rates

 

 

 

 

 

 

 

 

 

 

 

 

 

for non-interlaced scanning. If a problem occurs when

 

 

 

 

 

 

 

 

 

 

 

 

 

using a non-interlaced signal, try adjusting the graphics

 

 

 

 

 

 

 

 

 

 

 

 

 

board to increase the refresh rate (if possible). Refer to

 

 

 

 

 

 

 

 

 

 

 

 

 

the graphics board manual for information.

 

5.

Moiré patterns appear.

Reduce the moiré using the “Moiré” function in the

 

 

 

 

 

 

 

 

 

 

 

 

 

ScreenManager “Screen” menu. (p.15)

 

 

 

 

 

 

 

 

 

 

 

 

 

Change the horizontal and vertical size of the display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

area.

 

 

 

 

 

 

 

 

 

 

 

 

 

Change the selected desktop or wallpaper pattern to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

any solid color pattern. For detailed information on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

how to change these patterns, refer to the PC and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

operating system manual.

 

6.

The characters and

Change the mode of “Signal Filter” function in the

 

 

images have a slight

ScreenManager “Screen” menu. (p.16)

 

 

shadow on their right

Change the refresh rate. Refer to the PC and graphics

 

 

side.

board manual for information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH

5.TROUBLESHOOTING 23