Eizo G22-BL/G22-CL 5. ATTACHING AN ARM, Setup Procedure, 2. Lay the LCD monitor down. Do not scratch the panel

English

5. ATTACHING AN ARM

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor.

NOTE

•If you will use the arm or stand of other companies, confirm the followings to the arm or stand maker before selecting.

-Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)

-Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable

-TÜV/GS approved arm or stand

•Please connect cables after attaching an arm stand.

Setup Procedure

1. Hold the center of the stand mounting cover and slide them rightward or leftward to remove the mounting cover.

Stand mounting cover

2. Lay the LCD monitor down. Do not scratch the panel.

3. Remove the tilt stand by loosening the screws. (4 pcs of M4 x 10 mm)

22 5. ATTACHING AN ARM