English
6. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
•No picture problems → See No.1 - No.2
•Imaging problems → See No.3 - No.7
•Other problems → See No.8 - No.9
•USB problems → See No.10 - No.11
| Problems | Points to check with possible solutions | |
| 1. No picture | Check that the power cord is correctly connected. | |
| • Indicator status: Off | If the problem persists, turn off the monitor power | |
| for a few minutes, then turn it back on and try | ||
|
| ||
|
| again. | |
|
|
|
|
| • Indicator status: Green | Check the “Brightness” setting. | |
| • Indicator status: Orange | Try pressing a key on the keyboard, or clicking the | |
|
| mouse. (p.19) | |
| • Indicator status: Slowly flashing | Try pressing the Power Button. | |
|
|
| |
| Orange | Try turning the PC on. | |
| • Indicator status: Flashing Orange | ||
|
|
| |
| (twice for each) |
|
|
| 2. Error message shown below will | This message appears when the signal is not inputted | |
| remain on the screen for 40 | correctly, even if the monitor functions properly. | |
| seconds. | When the image is displayed correctly after a short | |
|
| time, there is no problem with the monitor. (Some | |
|
| PCs do not output the signal soon after powering | |
|
| on.) | |
|
| Check that the PC is turned ON. | |
|
| Check that the signal cable is properly connected to | |
|
| the PC or graphics board. | |
| 3. Error message shown below will | Use the graphics board's utility software to change | |
| appears. | the frequency setting. (Refer to the manual of the | |
| • The message appears when the signal | graphics board.) | |
|
|
| |
| is out of input range. ([Input Range] |
|
|
| Resolution: 1600 x 1200, Frequency: |
|
|
| 60 Hz) |
|
|
|
|
|
|
|
|
|
|
24 6. TROUBLESHOOTING