2-2. Connecting the signal cable

•Be sure that the power switches of both the PC and the monitor are OFF.

1.Remove the rear cover from the monitor.

When removing the rear cover, push down the buttons while pulling.

buttons

2. Plug the signal cable into the D-Sub connector at the rear of the monitor and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Video Output Connector D-Sub mini 15 pin

Power cord

·Standard graphics board ·Macintosh G3 (Blue & White) / G4

Signal Cable (enclosed)

Video Output Connector

D-Sub 15 pin

Macintosh

Macintosh Adapter (Optional)

ENGLISH

2. CONNECTING UP 15