Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function | • Auto adjustment button adjustments and settings in the |
| ScreenManager. |
Unlocked function | • Adjustment of contrast and brightness by the control buttons. |
| • Input signal selection button |
• To lock
Press on the Auto adjustment button while switching on the monitor’s power.
• To unlock
Switch off the monitor’s power, then hold down the Auto adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce afterimage p.46) characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
[Procedure]
(1)Select “Off Timer” in the ScreenManager “Others” menu.
(2)Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to 23 hours).
[Off timer system]
PC | Monitor | LED |
|
|
|
On Period (1H~23H) | Operation | Green |
|
|
|
Last 15 min. in "On period" | Advance Notice *1 | Green Flashing |
|
|
|
"On period" expired | "Power Off" Mode | Flashing yellow slowly |
|
|
|
*1Advance notice (LED flashing green) will be given 15 minutes before the monitor automatically enters the “Power Off” mode. To delay entering the “Power Off” mode, press the power button during the advance notice period. The monitor will continue to operate for an additional 90 minutes.
Press the power button to return to a normal screen.
•The off timer function works while the PowerManager is active, but there is no advance notice before the monitor’s power is switched off.
20 3. ScreenManager