8. ATTACHING AN ARM STAND
The LCD monitor can be used with an arm stand by removing the tilt stand and attaching the arm stand to the LCD monitor.
NOTE
´Use an arm stand that satisfies the followings.
•When using the LCD monitor with an arm stand,the arm stand must be VESA approved :
[L371]
*Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad.
*Use an arm stand that is able to support an object weighing 8.0 kg.
[L671]
*Use an arm stand with a 100 mm x 100 mm hole spacing on the arm mounting pad.
*Use an arm stand that is able to support an object weighing 13.5 kg.
´TÜV/GS approved arm stand.
´Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.
´Use an arm stand remaining that position where it is manually moved.
´Use an arm stand with the ability to tilt the monitor forward and backward.
´Use an arm stand less than or equal to 500 mm in relation to the desk surface when the arm stand is in its lowest position.
M4 x 12 mm
75 mm 
75 mm
M4 x 12 mm
100 mm 
100 mm
500 mm or less
(Example)
´Please connect cables after attaching an arm stand.
36 8. REFERENCE