Eizo L560T-C 2-2.Connecting the signal cable

English

NOTE

ξ Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Contents

User’s Manual Touch Panel Color LCD Monitor SAFETY SYMBOLS WARNING CAUTION TABLE OF CONTENTS PRECAUTIONS IMPORTANT WARNING Page CAUTION LCD Panel 1. INTRODUCTION 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors Front Rear 2. CABLE CONNECTION 2-1.Before connecting Analog Input Digital Input 2-2.Connecting the signal cable 3. Turn on the monitor’s main power and then switch on the PC's power 4. Install the TouchWare with following the instructions on the CD- ROM 2-3.Touch Operation 2-4.Connecting two PCs to the monitor 3. ScreenManager 3-1.How to use the ScreenManager 3-2.Adjustments and Settings 3-3.Useful Functions Adjustment Lock Off Timer EIZO Logo display Automatically selecting the input signal function 4. ADJUSTMENT 4-1.Screen Adjustment Adjustment Procedure 3. Adjust by using <Screen> menu in the ScreenManager 4. To adjust the output signal range (Dynamic Range) of the signal οUse the <Range Adjustment> (p.36) 5. To smooth the blurred texts of the enlarged screen of the lower resolutions οSwitch the <Smoothing> setting 4-2.Color Adjustment Page 5. ATTACHING A STAND Setup Procedure Page 6. TROUBLESHOOTING Page Page Page 7. CLEANING 8. SPECIFICATIONS Page Page 9. GLOSSARY Page APPENDIX/ANHANG/ANNEXE FCC Declaration of Conformity Canadian Notice