English

EIZO Logo display

Enables to display the EIZO logo for a while when switching on the monitor (Default is no logo). If you desire to display or undisplay this logo, use this function.

[To display]

(1)Switch off the monitor’s power by the Power switch on the control panel.

(2)Hold down the Enter button once again and turn the power back on.

[To undisplay]

(1)Switch off the monitor’s power by the Power switch.

(2)Hold down the Enter button once again and turn the power back on.

Automatically selecting the input signal function

The monitor will automatically detect the inputted signal of either the connection for display.

Connecting two PCs to the monitor

When the one computer is switched off, the monitor will automatically dislay the other signal.

Use the ScreenManager to switch the input selection to manual.

[Procedure]

(1)Select <Input Signal> in the <Others> menu.

(2)Select “Manual”.

3. ScreenManager 19