![](/images/backgrounds/140607/140607-5413x1.png)
English
2-2. Connecting the signal cable
NOTE
•Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the
Power Cord
Analog Input
Signal Cable | Connector | PC | |
Signal Cable | Video Output | Standard graphics card | |
enclosed) | Connector | Macintosh G3 (Blue & White) | |
| 15 pin | ||
| / G4 | ||
|
| ||
Signal Cable | Video Output | Macintosh | |
enclosed) + Macintosh | Connector | Macintosh Adapter (Optional) | |
Adapter (Optional) | pin | ||
|
Digital Input
Signal Cable | Connector | PC | ||
|
|
|
|
|
Signal Cable | Video Output | Digital graphics board | ||
enclosed) | Connector DVI |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
•The monitor is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple Display Connector)
2.Plug the power cord into the power connector on the rear of the monitor.
2. CABLE CONNECTION 13