Locked function
Unlocked function

English

3-4. Useful Functions

Adjustment Lock

Use the “Adjustment Lock” function to prevent any accidental changes.

Auto adjustment button adjustments and settings in the ScreenManager.

Auto Adjustment Button

Selecting of the Fine Contrast mode by the control buttons.

Input signal selection button

To lock

Switch off the monitor’s power by the power button on the front panel. Press on the Auto adjustment button while switching on the monitor’s power.

To unlock

Switch off the monitor’s power by the power button on the front panel, then hold down the Auto adjustment button once again and turn the power back on.

Off Timer

The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce afterimage (p.44) characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.

[Procedure]

(1)Select <Off Timer> in the ScreenManager <Others> menu.

(2)Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to 23 hours).

[Off timer system]

PC

Monitor

LED

On Period (1H - 23H)

Operation

Green

Last 15 min. in "On period"

Advance Notice *1

Green Flashing

"On period" expired

Power off

Flashing yellow slowly

*1Advance notice (LED flashing green) will be given 15 minutes before the monitor automatically enters the “Power Off” mode. To delay entering the “Power Off” mode, press the power button during the advance notice period. The monitor will continue to operate for an additional 90 minutes.

[Procedure]

Press the power button to return to a normal screen.

NOTE

The off timer function works while the PowerManager is active, but there is no advance notice before the monitor’s power is switched off.

20 3. ScreenManager