English

6.ATTACHING AN ARM

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor.

NOTE

zIf you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.

–Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)

–Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable

–TÜV/GS approved arm or stand

zPlease connect cables after attaching an arm stand.

Setup Procedure

1.Lay the LCD monitor down. Do not scratch the panel.

2.Remove the tilt stand by loosening the screws. (4 pcs of M4 x 14mm)

3.Attach an arm stand to the LCD monitor securely.

Arm-stand

M4 Mounting Screws: M4 x 12 (mm)

6. ATTACHING AN ARM 35