English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problems

Points to check with Possible Solutions

 

 

 

 

 

 

 

3. Display position is incorrect.

† Adjust the image position using the <Position>.

 

 

 

 

 

(p. 25)

 

 

 

 

 

† If the problem persists, use the graphics

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

board’s utility software to change the display

 

 

 

 

 

position if available.

 

 

 

 

 

 

4. Screen image is smaller or larger

† Adjust the resolution using the <Resolution>.

than the actual screen images.

(p. 26)

5.Vertical bars of distortion appear. † Decrease the vertical bars using the <Clock>.

(p. 24)

6. Horizontal bars of distortion

† Decrease the horizontal bars using the

appear.

<Phase>. (p. 25)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.Letters and lines appear blurred. † Adjust the blurred lines using <Smoothing> (p. 27)

8. Distortion appears like the figure

† This happens when both composite (X-OR)

below.

input signal and separate vertical

 

synchronizing signal are input. Please select

 

one of the two.

9. The screen is too bright or too

† Adjust the <Brightness> (The backlight of the

dark.

LCD monitor has a fixed life span. When the

 

screen becomes dark or begins to flicker,

 

please contact your dealer.)

 

 

10. Afterimages appear.

† When the screen image is changed after

 

displaying the same image for a long period, an

 

afterimage may appear. The “Afterimage” can

 

be removed gradually by changing the displayed

 

image. Use the “Off Timer” function and avoid

 

keeping the screen on all the time. (p. 21)

 

 

11. The screen has defective pixels

† This is due to the characteristics of the panel

(e.g. slightly light or dark).

itself and not the LCD product.

 

12. Fingerprints remain on the screen. † Leaving the screen white may solve the problem.

7. TROUBLESHOOTING 37