English

5. Turn on the monitor's main power and then switch on the PC's power.

The monitor’s power indicator will light up (blue).

If an image does not appear, refer to the “TROUBLESHOOTING” (p. 42) for advice.

Whenever finished, turn off the PC and the monitor.

6. When using the monitor in portrait style, refer to the “6. ActiveRotation Function” (p. 35).

NOTE

•When turning on the monitor, the kind of the input signal (Signal1/ Analog or Signal 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

•Adjust brightness of the screen depending on the brightness of your environment.

•Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the D-Sub mini 15 pin connector and the DVI connector on the back of the monitor.

Connecting Examples

D-Sub mini 15 pin

DVI

(SIGNAL 1)

(SIGNAL 2)

 

PC 1

 

PC 2

 

(Ex.1) Analog D-Sub

Signal Cable

Signal Cable

D-Sub

Analog

mini 15

(MD-C87 enclosed)

(FD-C16 enclosed)

mini

 

pin

15 pin

 

 

 

 

(Ex.2) Analog D-Sub

Signal Cable

Signal Cable

DVI

Digital

mini 15

(MD-C87 enclosed)

(FD-C39 Optional)

 

 

pin

 

 

 

 

 

 

2. CABLE CONNECTION 15