English

5-2. Sub Window Settings

Display Mode

<Standard> and <Clip> modes are available for displaying the Sub window (refer to following figures) for displaying the Sub window.

The mode is set on the <Picture in Picture> menu of ScreenManager.

[Example]

Signal 1

Signal 2

<Standard> Mode

<Clip> Mode

Displaying the screen image in full

Displaying a certain part of the screen

screen with reducing the image size (p.

image without reducing the image size (p.

32)

33)

Main Window

Main Window

 

Sub Window

Sub Window

<Standard> Mode

Displaying the screen image in full screen with reducing the image size in the Sub window. Select <Standard> mode on <Picture in Picture> menu of ScreenManager.

To select the size

Select <Window Size>.

This sets the window size from “Large” (approx. 1/4) or “Small” (approx. 1/16). Select the size of the Sub window, “Large” or “Small” in <Window Size>.

NOTE

After selecting the size, the actual Sub window size depends on the input signal.

To adjust the position

Select <Window Position>.

This adjusts the position of the Sub window.

Select <Window Position> and adjust the position by using the up, down, right and left buttons.

32 5. ActiveShot Function