English
| Problems | Points to check with Possible Solutions |
11. | Afterimages appear. | When the screen image is changed after displaying |
|
| the same image for a long period, an afterimage |
|
| may appear. The “Afterimage” can be removed |
|
| gradually by changing the displayed image. Use the |
|
| “Off Timer” function and avoid keeping the screen |
|
| on all the time. (p.22) |
12. | The screen has defective pixels (e.g. | This is due to the characteristics of the panel itself |
| slightly light or dark). | and not the LCD product. |
|
|
|
13. | Fingerprints remain on the screen. | Leaving the screen white may solve the problem. |
|
|
|
14. | The noise appears on the screen. | Change the mode in <Signal Filter> in the <Screen> |
|
| menu. |
15. | The <Smoothing> cannot be | <Smoothing> is disabled when the screen is |
| selected. | displayed in the 1600 x1200. |
|
| The image size is doubled both in horizontally and |
|
| vertically to (i.e. 1600 x 1200 enlarged from 800 x |
|
| 600) provide clear focus which does not require |
|
| this function. |
16. | The Main menu of ScreenManager | The adjustment lock is probably on. To unlock: |
| does not operate. | turn the LCD monitor off. Then, while pressing |
|
| the Auto Adjustment Button, turn the power on. |
|
| (p.22) |
|
| Check that the FineContrast mode is not activated. |
|
| (p. 18) |
17. | The FineContrast mode does not | Check that the Main menu of ScreenManager is |
| operate. | not activated. (p.20) |
|
|
|
18. | The Auto Adjustment Button does | The adjustment lock is probably on. To unlock: |
| not operate. | turn the LCD monitor off. Then, while pressing |
|
| the Auto Adjustment Button, turn the power on. |
|
| (p.22) |
|
|
|
19. | Frequency does not change after | Use the graphics board’s utility software to change |
| installing “Monitor information file” | the input signal frequency. |
| in the attached utility disk on |
|
| Windows 98/2000/Me/XP. |
|
|
|
|
38 6. TROUBLESHOOTING