28 Chapter 3 Setting Monitor
3-8. Enable/Disable Auto Sharpness [Auto Sharpness]
By enabling Auto Sharpness outlines w ill be adjusted according to the displayed image which ca n
improve its feel and texture.
Procedure
Choose <Tools> from the Adjustment menu, and press .
Choose <Auto Sharpness> from the <Tools> menu, and pres s .
Select “On” or “Off” with or .
Press to exit the adjust ment.
NOTE
The extent of adjustment depen ds on the set up value of [Outline Enhancer].•
3-9. Restoring the Default Setting
There are two types of Reset. One is t o reset the color adjustment only to the default setti ngs, and the
other is to reset all the settings t o the default settings.
Attention
After resetting , you cannot undo the operation .•
NOTE
For main default settings, refer to “ Main default settings (factory se ttings)” on page 41.•
● To reset color adjustment values [Color Reset]
Only the adjustment values in the cu rrent mode will revert to the default set tings (factory settings).
Procedure
Choose <Color> from the Adjustment menu, and press .
Choose <Color Reset> from the <Color> menu and press .
Select “Execute” with or .
Press to exit the adjust ment.
The color adjustment values rever t to the default settings.
● To reset all adjustments to th e factory default settings [All Reset]
Reset all adjustments to the factor y default settings.
Procedure
Choose <Tools> from the Adjustment menu, and press .
Choose <All Reset> from the <Tools> menu, and press .
Select “Execute” with or .
Press to exit the adjust ment.
All setting values rever t to the default settings.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.